I had issues with noise being brught in to the tachinput from the injectors, I run them PWM.
Cut and rerouted the 12v raw feed to the flyback TIP125's, made a big difference but I noticed that if I dont have this connected for example on the stim the cpu wont start up?
It doesn't help that I hook it up after the normal 12V feed, it has to be before or at the same time for the cpu to start up?
Is this a sign of some other problem or normal?
Cut the 12V feed to flyback, wont connect now?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Per Eriksson
- MegaSquirt Newbie
- Posts: 5
- Joined: Thu May 06, 2004 11:00 am
- Location: Sweden
- Contact:
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Cut the 12V feed to flyback, wont connect now?
Is this an MS1 or MS2?
