As I have noticed MS1 only show max coolant temp of 215F/102C.
I have noticed, that with standard firmware (no EasyTherm mod) and GM CLT sensor MS shows over 215F/102C even over 360F/180C.
But when I use EasyTherm for firmware mod (Bosch sensor) and corresponding inc files MegaTune only shows max 215F/102C.
I can make EasyTherm mod with out inc files and then MegaTune shows over 215F/102C but the are wrong because I don't use right inc files.
Why can MS1 show over 215F/102C with GM sensors and not with Bosch sensor?
I have read that the embedded code that runs on the MS processor uses temperature units of degreesF + 40, meaning that the temperature measurement range is -40F thru 215F.
How does the standard GM firmware work then?
As I understand at the moment it is impossible to switch radiator fan on at 230F/110C with Bosch sensor?
Can MS1 measure over 215F/102C?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
M-Tech
- MegaSquirt Newbie
- Posts: 2
- Joined: Sat Oct 29, 2005 4:52 pm
- Location: Estonia, Tallinn
- Contact:
Can MS1 measure over 215F/102C?
Subaru Impreza GT MY99 | Audi A6 2.7 Bi-Turbo Quattro '02 | VW CORRADO G60 '91
-
M-Tech
- MegaSquirt Newbie
- Posts: 2
- Joined: Sat Oct 29, 2005 4:52 pm
- Location: Estonia, Tallinn
- Contact:
Re: Can MS1 measure over 215F/102C?
Anyone?
As I have read 215F/102C should be the maximum temperature because how the values are stored in MS1 processor.
With GM sensors and unmodified firmware/megatune MegaTune can show higher temperature values but useful for outputs are only lower than 215F/102C.
Does anyone have something to add?
As I have read 215F/102C should be the maximum temperature because how the values are stored in MS1 processor.
With GM sensors and unmodified firmware/megatune MegaTune can show higher temperature values but useful for outputs are only lower than 215F/102C.
Does anyone have something to add?
Subaru Impreza GT MY99 | Audi A6 2.7 Bi-Turbo Quattro '02 | VW CORRADO G60 '91