I have reached the point of installation where i am supposed to test some in MegaTune. I have loaded the firmware OK, ver. 2.890. I am using e Profilic USB to Serial adapter on my laptop, and installed the latest drivers. I have never earlier for other usage had trouble with this adapter. I installed the firmware using the "update" menu in the "MS Download 2.0", and if I am not completely wrong, this should copy the settings i need for MegaTune to work, but I am getting a error message when trying to start MegaTune.
I have attached the error message that I am getting.
As far as I know, all the settings for my USB adapter is correct.... I have also tryed with different firmware versions, with the same result.
Torstein
Connection problems
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Connection problems
You do not have the required permissions to view the files attached to this post.
Re: Connection problems
I found the problem. For some reason on my install, in the folder: C:\Program Files\MegaSquirt\car1\mtCfg in the file "called megatune.cfg" the first line was saying: "COM3", when I always have used com1. I changed this value to "COM1" and everyting was working fine.