injector application/flow rating cross reference?
Posted: Thu Nov 12, 2009 7:56 am
Can anyone tell me where I might find information that tells me what size injectors were used in various vehicles? I'm supercharging a Chev 4.3 and running it on E-85. I initially planned to run the TBI setup, but after more thought (and education) I figured I'd avoid more tuning problems down the line if I went MultiPort right off the bat. The calculators say I need 6 injectors @ 39.7 lbs/hr to support the estimated 260 HP that it should make. I think I could get away with as little as 35 lb/hr injectors by bumping up rail pressure. Times are tight, I'd like to be able to scout the salvage yards, but it would help to know what the possible donors are.
As always, many thanks to anyone who might be able to help me out.
As always, many thanks to anyone who might be able to help me out.