Injector wire gauge
Posted: Thu Feb 25, 2010 6:46 am
Little confused at the moment just about to order the cable for my MS 2 intsall.
The manual says
"For the wires from the DB37 connector to the sensors, injectors, etc., use 18 to 20 gauge for all the connections, then bring them to a common 14-12 gauge where appropriate. The only big wires are the ground and the two injector driver pairs, 32-33 and 34-35, all the rest can be 18 gauge all the way out."
Does this mean
A Bring them all out using 18 to 20 gauge then for the injectors and grounds jion them up to 14-12 gauge wires as they come out of the D connector.
B Run the thicker wire straight out of the connector.
I'm guessing it's A
Just want to make sure.
Steve
The manual says
"For the wires from the DB37 connector to the sensors, injectors, etc., use 18 to 20 gauge for all the connections, then bring them to a common 14-12 gauge where appropriate. The only big wires are the ground and the two injector driver pairs, 32-33 and 34-35, all the rest can be 18 gauge all the way out."
Does this mean
A Bring them all out using 18 to 20 gauge then for the injectors and grounds jion them up to 14-12 gauge wires as they come out of the D connector.
B Run the thicker wire straight out of the connector.
I'm guessing it's A
Just want to make sure.
Steve