General MS tuning question: VE table changes
Posted: Sat Sep 11, 2010 12:23 pm
Hey folks, been doing some tuning this week trying to get my afrs done a bit as I up the boost. I have a question, when using the logger and such lets say at whatever given kPa/rpm ive got four cells lit up with various shades of opacity. Which one will generally change the afr the most, the darkest? IT seems when i change the four it affects the rpm/kPa piont beneath to often.
For instance at 5000 rpm and 200kpa ill aim for AFR A lets ay 11.5. The lit up cell will suround the four around that piont, when I change all four to get down to lets say 11.3 the cells beneath the 4 change those afrs to much. Is there just a nack from experience or do u have suggestions?
For instance at 5000 rpm and 200kpa ill aim for AFR A lets ay 11.5. The lit up cell will suround the four around that piont, when I change all four to get down to lets say 11.3 the cells beneath the 4 change those afrs to much. Is there just a nack from experience or do u have suggestions?