some help

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
mopar3.0
MegaSquirt Newbie
Posts: 3
Joined: Sat Jun 23, 2007 5:27 pm

some help

Post by mopar3.0 »

running mitsubish 6g72 car drives good
the car sohc na. 3.0

the car pulls good off the line and at around 4 k it feels and sounds like it hit boost or vtech, and pulls like a a cuddled ape but the midrange feels like it struggles

would i look at my timming map or fuel for this?
Bernard Fife
Master Squirter
Posts: 475
Joined: Thu Oct 29, 2009 12:54 pm

Re: some help

Post by Bernard Fife »

m3,

Could be either. Post a datalog and MSQ and we might be able to spot something.

Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Post Reply