MSefi.com read only forum (Jan.15,2018)

I noticed the base tune on DIYAutoTune, but it says it's for the MS2/Extra. Will this work with MS2 as well? If not, anyone have a good tune for me to reference? I'm running the FMS 30 lb injectors.

You could export the VE and spark tables and use them with B&G code, but if this car already has twin turbos, you probably will want to make a new tune from scratch anyway.

Matt Cramer wrote:You could export the VE and spark tables and use them with B&G code, but if this car already has twin turbos, you probably will want to make a new tune from scratch anyway.

I figured that, but was hoping the WUE was transferable and similar enough since I was hoping the turbos wouldn't have too much effect on the tune at idle.

Anyone have any timing table or VE table recommendations for a TT Mustang running low boost (5 - 10 psi)? Just wanted to have something to consider instead of just starting on the conservative side adjusting from the stock tables.

There's an EFI tunign section on Turbomustangs.com, and surely someone there can help you with MS stuff.

I realize this is the MS board, but there's such a variety of cars here. Turbomustangs is, well, exactly what it's called.