Page 1 of 1
variable reluctance sensor
Posted: Fri Jan 07, 2011 9:22 pm
by jegrajeda
our megasquirt doesnt seem to read our working variable reluctance sensor. any ideas
Re: variable reluctance sensor
Posted: Wed Jan 12, 2011 7:48 am
by Matt Cramer
I need a lot more information...
Can your MS get an RPM signal on a Stim?
Are you using a wheel decoder?
Do you have an oscilloscope by any chance?
Re: variable reluctance sensor
Posted: Wed Jan 19, 2011 7:39 am
by jegrajeda
Can your MS get an RPM signal on a Stim? I do have a stim, doesnt seem to be functioning correctly ( can it be used with tuner studio?)
Are you using a wheel decoder? No wheel decoder
Do you have an oscilloscope by any chance? I could get my hands on one. I should test the sensor first. If its not the sensor then the ecu is corrupt?
its a school project and many people not knowing what they were doing messed with the ecu
Re: variable reluctance sensor
Posted: Wed Jan 19, 2011 7:59 am
by trakkies
IMHO, the main reason for the stim is to test the basics of the MS before it is installed. If it doesn't work on the stim it won't when installed.
It will work with TS.