MSefi.com read only forum (Jan.15,2018)

hey guys i new to mega squirt i only have one issue so far

on the eternal diag.
it shows 4 injectors controlled by two wires comeing from the ecu

now is that correct
or isnt there supposed to be :
one v+ to all 4 injectors and then 4 wiers on te each inj ?

thanks in ahead of time

Payko0o wrote:hey guys i new to mega squirt i only have one issue so far

on the eternal diag.
it shows 4 injectors controlled by two wires comeing from the ecu

now is that correct
or isnt there supposed to be :
one v+ to all 4 injectors and then 4 wiers on te each inj ?

thanks in ahead of time

There are two drive circuits which can be configured to fire together or alternately. These ground the injectors. Only one +12v feed is requited to all. If you want control of all 4 injectors individually (sequential) you'll need a different version of MS. But there's no advantage in this for most engines.

ok so ecentially two injectors will fire at the same time ..

soo ur saying follow the diag and it should work ill give it a try thanks