G'day
My MegaSquirt's type is "MS2357-C"Megasquirt-2 ECU w/PCBv3.57"Fiemware V2.888"
useing bosch 0 227 100 124 to igintion
We use oscillograph to scan the timing changed
Frist cranking rpm is 300rpm,the trigger offset and ignition table is working.(right position)
But when cranking rpm is more than 300rpm,the question is come,ignition timing always keep wrong position
trigger offset and ignition table is just like not work...
Ignition time can't be changed
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Ignition time can't be changed
Please post a MSQ, and a data log of the ignition timing being "stuck" if you have one.
Re: Ignition time can't be changed
This PNG is our record of waves
P.S:How to post my MSQ in the forum
(I know this is very stupid question....)
P.S:How to post my MSQ in the forum
(I know this is very stupid question....)
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Ignition time can't be changed
Below the Save - Preview - Submit buttons, you will find a pair of tabs marked "Options" and "Upload Attachment." Click the Upload Attachment tab. Then click the "Browse" button that appears. A file open dialog box will pop up. Select the file, then click Open. Then fill in the description in the field below the file name. Once you have all that, click Add the File. Repeat this, starting with "Browse," to add more files. Once you have these all attached, you can enter your post and the files will be attached.nk920605 wrote:This PNG is our record of waves
P.S:How to post my MSQ in the forum
(I know this is very stupid question....)
Re: Ignition time can't be changed
Here the MSQ is , please solve our problem , thanks . = )
Maybe our problem is easy to you, but it's important to us . = (
Maybe our problem is easy to you, but it's important to us . = (
You do not have the required permissions to view the files attached to this post.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Ignition time can't be changed
First, I see you're running 2.6x firmware - I'd upgrade to the latest stable release, first.