Does anyone know if it is possible to replace K-Jetronic injectors with electronic fuel injectors that allow a '80 Mercedes 450 SLC to be Megasquirted?
Would this require mechanical machining of the inlet manifold?
TIA
Philip
EFI injector replacements for K-Jetronic injectors?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Philip Lochner
- Helpful Squirter
- Posts: 96
- Joined: Thu Feb 16, 2006 5:18 am
- Location: South Africa
- Contact:
EFI injector replacements for K-Jetronic injectors?
Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
-
jb007
- MegaSquirt Newbie
- Posts: 14
- Joined: Sun Oct 19, 2008 7:10 pm
- Location: Hoppers Crossing, Victoria, Australia
- Contact:
Re: EFI injector replacements for K-Jetronic injectors?
Hi, I have no experience of this conversion, but found this using Google http://www.hitechengineering.net/dnn/Me ... fault.aspx
Jim
Jim
Australian 1968 Morris Mini Deluxe 1310 A+ with Patton Machine Products HIF44 SU TBI Adapter
MegaSquirt III
My Blog: http://www.jims-blog.com
MegaSquirt III
My Blog: http://www.jims-blog.com
-
Philip Lochner
- Helpful Squirter
- Posts: 96
- Joined: Thu Feb 16, 2006 5:18 am
- Location: South Africa
- Contact:
Re: EFI injector replacements for K-Jetronic injectors?
Wow Jim, either you are exceedingly good at Googling or I am most lazy at Googling but this is fantastic info!!
Thanks VERY much!
Thanks VERY much!
Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
-
jb007
- MegaSquirt Newbie
- Posts: 14
- Joined: Sun Oct 19, 2008 7:10 pm
- Location: Hoppers Crossing, Victoria, Australia
- Contact:
Re: EFI injector replacements for K-Jetronic injectors?
Philip Lochner wrote:Wow Jim, either you are exceedingly good at Googling or I am most lazy at Googling but this is fantastic info!!
Thanks VERY much!
Hope it helps you! 
Australian 1968 Morris Mini Deluxe 1310 A+ with Patton Machine Products HIF44 SU TBI Adapter
MegaSquirt III
My Blog: http://www.jims-blog.com
MegaSquirt III
My Blog: http://www.jims-blog.com
Re: EFI injector replacements for K-Jetronic injectors?
See that u planning to convert your SL, I'm doing that right now on my 280SL...
Not the same engine but maby we can share some info during the process ...
Check my blog at http://mb280sl.blogspot.com/ to see what I done so far...
Not the same engine but maby we can share some info during the process ...
Check my blog at http://mb280sl.blogspot.com/ to see what I done so far...
kind regards... Peter