coil that can be used with edis
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
sr20miatact
- MegaSquirt Newbie
- Posts: 8
- Joined: Sun Mar 06, 2011 3:26 pm
coil that can be used with edis
Hi im looking into doing a crank trigger wheel in my sr20det swapped miata. I am going to be doing a crank trigger wheel from diy auto tune. The s13 sr20 uses coil on plus with out built in ignitor but it has a ignitor thats inline like the 1.6l miata. I was looking to into doing edis as it looks simple but i would like to be able to keep my stock coil on plugs. If i cant use my coil on plugs i would like to try the DIY auto tune IGN-4 coil.
Re: coil that can be used with edis
if the crank trigger is a 36-1 go with the edis module and tie 1/4 & 2/3 together for the module's output ! instant Waste spark COP ! I run my dodge 2.0 dohc coil with an edis4 module , haven't experienced any troubles so far !!
-
sr20miatact
- MegaSquirt Newbie
- Posts: 8
- Joined: Sun Mar 06, 2011 3:26 pm
Re: coil that can be used with edis
Cool thanks for the info. 