Hi guys,
The car runs great, except, you knew there was going to be an "Except"!
Anyway, what's the difference between "MAPdot" and "mapDOT"?
I use Eric Fahlgren's MegaTune 2.25 P3.
When I cruise on the freeway at about 60 MPH I get a slow vibration that I can feel. It's about 1 second per full cycle. It will make you nauseous after awhile. I thought it was missing but upon datalogging I found this. It's a word file so it should be easy to open. Maybe Powerpoint would have been better. Anyrate what's the difference between the two? Is there a formula that I can figure out what is causing it? Do you know what causes it? Otherwise the car runs great. This just became obvious recently.
Thanks
Holl
I guess I don't know how to upload a file as it doesn't appear to have been uploaded.
But it looks like a very small square wave of one second duration and between -43 to +25.
OK I finally noted the size limitation.
MAPdot vs. mapDOT
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MAPdot vs. mapDOT
They should be the same thing. Mind posting the whole data log?drholl wrote:Hi guys,
The car runs great, except, you knew there was going to be an "Except"!
Anyway, what's the difference between "MAPdot" and "mapDOT"?
-
drholl
Re: MAPdot vs. mapDOT
Thanks Matt.
It's been awhile since I needed help.
But the two traces, one of "MAPdot" and one of "mapDOT", as seen on MegaTune are definitely different.
And here's the .MSQ also.
Thanks again.
Holl
I'll repost and make the file smaller.
It's been awhile since I needed help.
But the two traces, one of "MAPdot" and one of "mapDOT", as seen on MegaTune are definitely different.
And here's the .MSQ also.
Thanks again.
Holl
I'll repost and make the file smaller.
You do not have the required permissions to view the files attached to this post.