Cover for DB37

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
trakkies
Super Squirter
Posts: 1162
Joined: Tue Dec 30, 2008 3:06 am
Location: SW London, UK

Cover for DB37

Post by trakkies »

Has anyone found a better cover for the loom to DB37 connector? Made of metal with a big enough hole and cord grip. ;-)
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Cover for DB37

Post by Matt Cramer »

There's a lot of options out there - here's a metal one:

http://www.DIYAutoTune.com/catalog/meta ... p-127.html

For a cord grip, you might just use some heat shrink tubing over the wires before installing the cover.
Top
Post Reply

Return to “Wiring and Sensors”