Hi I have just purchased a Porsche 914 equiped with mega Squirt 2 v3.0
The car is running fine, but I want to learn a bit more about the software and interigating the data for when I on the race track.
I have installed Mega tune on my laptop and amended the config file accordingly. When I attempt to plug in to the control whilst the engine is running the engine stalls. With the laptop plugged in the engine will not start.
When I attempt to connect to MS I cannot get "no response" back from the MS.
Any pointers would be greatly appreciated- I think this is the start of a very very very steep learning curve !
All I am wanting to do is see what the engine is doing and look at the peramters already in the MS and see how it all works
Thanks in advance Gezz
Connection help please - just starting out in MS World
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Connection help please - just starting out in MS World
This is a link to all the MegiSquirt manuals
http://www.megamanual.com/index.html
http://www.megamanual.com/index.html