Page 1 of 1
Knock Sense
Posted: Mon Jul 25, 2011 9:07 am
by ScottWerks
When using the KnockSense unit in conjunction with the MSII V3.0 code version 2.905 do I need to install the 1K resistor and Zenor diode and jumper IAC1B to JS4 OR just do the jumper?
Thanks
Scott
Re: Knock Sense
Posted: Wed Sep 07, 2011 9:07 am
by ScottWerks
Just FYI - It appears to work fine without the extra componets and just adding the jumper!
Re: Knock Sense
Posted: Wed Sep 07, 2011 9:34 am
by DonTZ125
The reason for the extra parts is to protect the processor. If something happens to that signal wire and you wind up with +12v to that JS4 pin, you'll be buying a new MS2 card.
Re: Knock Sense
Posted: Fri Sep 09, 2011 4:20 pm
by ScottWerks
Thanks Don! I have the parts so I'll put them in!