Page 1 of 1
VE Table changes
Posted: Mon Oct 31, 2011 11:28 am
by Robert Spencer
When I change the required fuel from 9.2 to 4.4, I get very large numbers in the VE table. I am changing from 20lb injectors to 42 lb for the new turbo addition. I would think the numbers would be smaller for larger injectors? Am I wrong?
Re: VE Table changes
Posted: Mon Oct 31, 2011 11:46 am
by Matt Cramer
If you were using the "reset required fuel" command, this assumes you are changing Required Fuel *without* changing your injectors. Just change Required Fuel itself.
Re: VE Table changes
Posted: Mon Oct 31, 2011 11:56 am
by Robert Spencer
Thanks Matt. Do I have to change required fuel in the ECU before it affects the VE table? Just doing that off line still gives me very large numbers.
Re: VE Table changes
Posted: Tue Nov 01, 2011 4:04 am
by Matt Cramer
Exactly how are you changing Required Fuel?
Re: VE Table changes
Posted: Tue Nov 01, 2011 7:12 am
by Robert Spencer
I go to injector control under fuel set up and enter the new injector size and it goes from 9.2 with the 20lb injector to 4.4 with the 42lb injector. I am working off line when doing this.
Re: VE Table changes
Posted: Tue Nov 01, 2011 7:16 am
by Robert Spencer
Also when I check the required fuel under VE able, it shows the new number. I get numbers like 159, 147, ect. Can I do this with Tuner Studio?