MSefi.com read only forum (Jan.15,2018)

Ok, I have My MS-II built, and wired. I have power to the ECU, and everything works on the stim. Im running EDIS-4 with coil-on-plug. I do not have any spark. I am pretty positive my EDIS is wired right, but I cant figure this out. I am not sure where to start, so any help would be appreciated. I built this for a senior design project and I need the engine running and tuned in 4 weeks. Thanks in advance.

Also, my TPS is at 51-63% at all times even with the engine off. And My RPM's bounce from 0-8000 every second.

spl,

You might want to read the red text in the blue box here: http://www.megamanual.com/ms2/code.htm

Lance.

Thanks man. I was positive I put in the ECU type though. It wants MSI or MSII right? I inserted MSII. Ill go through it again though, and report back. I really appreciate this.

The code doesn't work with MS1, so that's not an option. The question the loader is asking is if you're using a MicroSquirt (=1) or a MegaSquirt-II (=2).

Ok well Im using MSII and thats what I put in. Maybe I did something wrong. Im trying again friday, so Ill be back to let you know how it goes.