Page 1 of 1
MegaHelp
Posted: Wed Nov 16, 2011 11:53 pm
by positive p
Ok, I've been a member of the forums for a very long time. Most of the time I'm just reading.
But no matter what, I cant find any "Getting Started" help.
How do I decide which MS fits my needs?
How do I know if I need the newest or an older version?
Re: MegaHelp
Posted: Thu Nov 17, 2011 1:31 am
by trakkies
Only you can decide which version you need based on your own personal requirements. Most of the dealers have FAQ pages which should help you decide.
This is one from the UK:-
http://www.extraefi.co.uk/glossary.htm
Re: MegaHelp
Posted: Mon Nov 21, 2011 6:42 am
by Matt Cramer
What sort of car / engine are you running?
Re: MegaHelp
Posted: Tue Nov 22, 2011 10:22 pm
by positive p
I'm working on a couple.
The first is a 1975 Ford Maverick with the stock 250ci. L6 that I am building a fuel injection setup for. It will be turbocharged.
The second is a 1979 Type 1 Volksrod with a Porsche 911 3.0L H6, possibly future turbo charging.
Re: MegaHelp
Posted: Wed Nov 23, 2011 6:49 am
by Matt Cramer
The biggest question is what you will be doing for ignition control.
Our Nova build articles may be a good starting poing.
http://www.DIYAutoTune.com/tech_article ... 1-nova.htm
Re: MegaHelp
Posted: Tue Nov 29, 2011 9:52 pm
by positive p
I'm not really wanting to run TBI, more Multi Port.
Re: MegaHelp
Posted: Tue Dec 06, 2011 6:27 am
by Matt Cramer
We've got that covered too - see part 3 of the articles.