Useing MS Download 2.00 "Could not Connect"
3 days @ 6 hours each = I'm too stupid for this.
Even though I can run the squirt on MegaTune, I can't update the code as it's probably corrupted. I know I'll be running Tuner Studio but I still need to update to Monitor_v2.905.abs
Sheeeeees; 25 years of bioMedical experience is useless.
Help !! ! !
Embedded Code Update Utility
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Embedded Code Update Utility
wg,
Did you see this: http://www.megamanual.com/connect.htm#ms2 ? You can ignore #1 and 8, 9, 10, and 11 until you have code loaded.
Lance.
Did you see this: http://www.megamanual.com/connect.htm#ms2 ? You can ignore #1 and 8, 9, 10, and 11 until you have code loaded.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw