I built my Megasquirt 3 last year (or was it the year before) Just built the megaview (great kit) and bought the Map Daddy Duel 4 bar sensor (for Barometric Correction) my question, Can I retro fit? Taking my old sensor off and fitting the new one or do I need to make adjustments first?
Rob
Map Daddy Duel sensor
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: Map Daddy Duel sensor
Last I looked, DIY had a good how-to ... Yup - http://www.DIYAutoTune.com/catalog/mapd ... p-117.html
Depending on what you had in there before, you'll need to update your .msq to the new sensor, but other than that it's pretty plug'n'play ...
Depending on what you had in there before, you'll need to update your .msq to the new sensor, but other than that it's pretty plug'n'play ...
-
Bobbyspit
- MegaSquirt Newbie
- Posts: 20
- Joined: Wed Feb 24, 2010 2:29 pm
- Location: Eccles. GTR Manchester. England
- Contact:
Re: Map Daddy Duel sensor
thanks
-
Bobbyspit
- MegaSquirt Newbie
- Posts: 20
- Joined: Wed Feb 24, 2010 2:29 pm
- Location: Eccles. GTR Manchester. England
- Contact:
Re: Map Daddy Duel sensor
Fitted and working fine. Great bit of kit.
Now here is the problem.
I have changed some of the settings using the SIM (MS currently not on a car/vehicle) and all settings have been lost, Currently using megatune 2.25 it states unknown variant and all the dials flash on and off. totally dumbfounded. I do not know where I went wrong.
I tried to load my standard settings which upto about an hour ago worked with no success.
All the gauges inc the new mapdaddy were working fine showing real time readings from my Stim board before I changed a couple of settings. I ensured rpm was set at zero prior to changing anyhing.
Any sugestions greatly recieved.
Rob
Now here is the problem.
I have changed some of the settings using the SIM (MS currently not on a car/vehicle) and all settings have been lost, Currently using megatune 2.25 it states unknown variant and all the dials flash on and off. totally dumbfounded. I do not know where I went wrong.
I tried to load my standard settings which upto about an hour ago worked with no success.
All the gauges inc the new mapdaddy were working fine showing real time readings from my Stim board before I changed a couple of settings. I ensured rpm was set at zero prior to changing anyhing.
Any sugestions greatly recieved.
Rob
-
Bobbyspit
- MegaSquirt Newbie
- Posts: 20
- Joined: Wed Feb 24, 2010 2:29 pm
- Location: Eccles. GTR Manchester. England
- Contact:
Re: Map Daddy Duel sensor
Sorry guys its a MS V2 PCB V3 with the daughterboard.
not the Megasquirt 3
not the Megasquirt 3
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Map Daddy Duel sensor
I would use TunerStudio instead of MegaTune - MegaTune doesn't work with some of the newer code variants, and TunerStudio is a lot easier to set up. If it doesn't get around the problem, let me know.
