Page 1 of 1

Wanting to squirt my 5.0 Tbird

Posted: Tue Jan 24, 2012 11:32 am
by Tshern
Here is my combo

88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4

Right now sitting on top of it is a mass-flo efi. I'd like to pull their mustang ECU out and swap in a squirt. It is the same ecu as factory so I should be able to plug in play using the guide on DIYautotunes site (http://www.DIYAutoTune.com/tech_article ... ustang.htm),
but I'm confused on which kit.

I'd like to get an unassembled kit to save money (and I think it would be cool to put together). I seem to remember a PNP kit for this awhile back but can't locate it again.

What kit would fit my needs best without having to change my harness? Future growth plans are AOD and turbo (or going 351 and turbo). I appreciate any help you guys can provide. This is my first big budget motor I put together and learned alot of stuff, mostly RESEARCH RESEARCH RESEARCH.

Thanks.

Re: Wanting to squirt my 5.0 Tbird

Posted: Wed Jan 25, 2012 5:41 am
by Matt Cramer
Yes, there is a kit that plugs into the stock wiring - you're probably thinking of this:

http://www.DIYAutoTune.com/catalog/diyp ... p-421.html

Re: Wanting to squirt my 5.0 Tbird

Posted: Thu Jan 26, 2012 1:52 pm
by Tshern
You are a saint.