Completely confused on Acceleration Wizard
Posted: Sun Jan 29, 2012 6:03 pm
Hi guys. I've recently got my car back on the road again and am now sporting ITBs. I've spent the last couple of days getting it to be pretty well driveable, just focusing on the VE table, spark advance, etc... I'm now starting to look at tuning acceleration enrichment, have read the guidelines in the MegaManual, but remain completely confused on how to do this is in MegaTune. As far as I can tell, the pre-set values in my table aren't discussed in the MegaManual, and I'm feeling very uncertain as to how to proceed. I've attached my MSQ in addition to a datalog I took today with some moderate second gear pulls in it. From reviewing the datalog, it appears that I go very lean right at the first tip in of the throttle, so assuming acceleration enrichment could help here. Would appreciate any constructive advice. Thanks.