Megasquirt II with 2905 software. I am using Tuner Studio. My question is I don't know were to set my AIT, "Air Inlet Temperature Based Fuel Correction" Is there a default setting I can use? I accidently erased mine thinking it was the cold start setting,, Oops..
I am starting over with a different crankshaft with a longer stroke. I had everything working great with the Megasquirt II and the old crank....
IAT Table Setting ?????
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: IAT Table Setting ?????
I found my answer buried in the Manual....Cooooool
Re: IAT Table Setting ?????
share a link or how can it be found as i did not managed to find it
best regards
best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3