Page 1 of 1
24 awg?
Posted: Wed May 23, 2012 4:28 pm
by phongshader
Is 24 awg 2 con shielded wire acceptable to use for crank vr/cas vr sensors?
Re: 24 awg?
Posted: Wed May 23, 2012 10:41 pm
by trakkies
There is virtually no current flow in these, so it's more a case of using a mechanically strong enough cable.
Re: 24 awg?
Posted: Mon Jul 09, 2012 8:38 pm
by Teranfirbt
As long as it is high quality, then no problem. The best stuff that is reasonably priced is Tefzel.
www.skygeek.com has it, but it can get a little spendy.
Re: 24 awg?
Posted: Tue Jul 10, 2012 1:11 am
by trakkies
You don't need to spend a fortune on so called special cables. Microphone cable - the balanced sort - will do very well.