MSefi.com read only forum (Jan.15,2018)

Posted: **Wed Aug 29, 2012 4:07 pm**

hey guys i got my car running
95 hyundai scoupe turbo
1.5l turbo
500cc high imp inj
walbro 255
ms2 v3 fuel only
tuner studio un reg < is it worth it to pay ?

car runs at about 14.7 +- a little

but when i get into a little bit of boost i no longer see the dot on the ve table :S
so i dont know what to do here is a datalog of a drive down the street
if some one could hel and point me in the right dirr plz

Posted: **Wed Aug 29, 2012 4:15 pm**

and here is the msq

Posted: **Wed Aug 29, 2012 5:27 pm**

tuner studio un reg < is it worth it to pay ?

Absolutely!!!!!

Ken

Posted: **Wed Aug 29, 2012 11:15 pm**

I'm not well up on turbos, but all your tables, VE, AFR, IGN appear to be for a naturally aspirated engine. I'd expect to see the max kPa to read at least your max boost. But I'm only guessing.

Posted: **Thu Aug 30, 2012 7:05 am**

yea i found my issue my kPa was set up 100 when it shoud be upto 150 kPa
this can get a little frustraiting but atleast in runs ok without boost

tonight i wil reset the tables and try to getinto some boost thanks guys

MSefi.com read only forum (Jan.15,2018)

some one that knows what there doing plz

some one that knows what there doing plz

Re: some one that knows what there doing plz

Re: some one that knows what there doing plz

Re: some one that knows what there doing plz

Re: some one that knows what there doing plz