MSefi.com read only forum (Jan.15,2018)

Hello,

I need help to diagnostic my problem, MS-2 whit V3

The only gauge they work greats in simulation whit the 2.1 slim is the clock,

All other value dot not refresh, the RPM gauge makes free games 0-8000 rpm each seconde and the other value need to reboot the MS to be refresh.
All the sensors work so they don't work in real time.
I need to remove the power to the slim and put it back to see the change.

IAT=ok
TPS=ok
CLT=ok
O2=ok
MAP=ok
RPM=bad....0-8000 rpm each seconde...

thanks in advance.

See the red text in the blue box here: http://www.megamanual.com/ms2/code.htm

thanks a lot I skipped this instruction.