My LC1 doesn't work worth crap and I'm tired of messing with it. What would you guys reccomend I replace it with?
I use it for my MS and the 2nd channel works with a cheapie ebay digital display to show my AFR.
I'd like to keep the ability to use my digital display (LC1 puts out 1v for 10AFR and 2v for 20AFR) but will consider swapping out for a different gauge if I have to. But, I definite want to keep the ability to run a gauge or some sort while also sending a signal to my MSII
Thanks!
Can anyone reccomend a WB02?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
BottleFed70
- MegaSquirt Newbie
- Posts: 31
- Joined: Fri Jun 24, 2005 2:22 pm
Can anyone reccomend a WB02?
1970 Ford Mustang
351W Single T70 Turbo 6 PSI
MSII, v3.0 PCB, v2.889 firmware, Megatune 2.25
351W Single T70 Turbo 6 PSI
MSII, v3.0 PCB, v2.889 firmware, Megatune 2.25
Re: Can anyone reccomend a WB02?
I went for Tech Edge - one reason being they do a DIY kit same as MS do. Building it yourself helps to understand how it works - and also means it can be repaired if it fails.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband