realy board wireing help
realy board wireing help
how doses someone go about to wire up a relay board as a stand alone system.
-
kjones6039
- Master Squirter
- Posts: 618
- Joined: Sat Jul 22, 2006 7:02 pm
- Location: Eureka, Nevada USA
- Contact:
Re: realy board wireing help
Just my 2 cents mind you........
You will need a minimum of 2 relays. One as the master and a second one for the fuel pump. You may want to add additional relays for other functions.
As I mentioned to you in your previous post on this topic, you will need to take a look at the external wiring diagrams in the manual for the specifics regarding wiring your aftermarket board.
Ken
You will need a minimum of 2 relays. One as the master and a second one for the fuel pump. You may want to add additional relays for other functions.
As I mentioned to you in your previous post on this topic, you will need to take a look at the external wiring diagrams in the manual for the specifics regarding wiring your aftermarket board.
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
-
kjones6039
- Master Squirter
- Posts: 618
- Joined: Sat Jul 22, 2006 7:02 pm
- Location: Eureka, Nevada USA
- Contact:
Re: realy board wireing help
Just a quick followup.
The MS3 external wiring diagrams can be found here: http://msextra.com/doc/ms3/hardware.html#wiring
Also, as I pointed out in your previous post, it might be better to post your MS3 questions on the MSExtra forum.
Ken
The MS3 external wiring diagrams can be found here: http://msextra.com/doc/ms3/hardware.html#wiring
Also, as I pointed out in your previous post, it might be better to post your MS3 questions on the MSExtra forum.
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7