MSefi.com read only forum (Jan.15,2018)

I have made it to step 55 with all things work. Firmware loaded and Tunerstudio recognized my mega squirt. clock ticked. I start Tunerstudio and I am unable to find "Realtime Display" as a selection.
This seems really basic. Can anyone help
Many Thanks
8803

What firmware are you running?

I loaded the latest per directions. I believe it is Monitor_v2.905.abs.s19. The early test for "clock" works. I jumpered for VR and therefore am not getting rpm. Adjusting variable resistors doesn't seem to help. The needle just whips back and forth. None of my pots function in real time. They do function if I power down and change them and power up. The dials moves. MAP seems to be correct for my sea level and volts are correct. It is the real time issue that is in question.
Thanks for your response.

Have you set the ECU type under the General menu?

I do not have a "General" menu that I can find in TunerStudio MS Lite 2.0.8. I looked for where to set the ECU before when I read the trouble shooting notes and could not find it. Is it in one of the Setup programs?
My kit came from you guys and I really appreciate the assistance.

Matt

Found it!!!! Under the fuel tab. All pots/gauges functioning now. Disregard the previous post. Not awake yet.
Many thanks for the assist .