MSefi.com read only forum (Jan.15,2018)

Hi all

Is it possible to use a timing light with an inductive pickup to check the timing of spark generated with MSD6a?

The reason I ask is that at idle MSD6a generates 3 sparks per combustion stroke. It seems to me that my timing light triggers randomly on any of these 3 sparks because the TDC mark on the pulley is jumping all over the place.

Any advice appreciated.

Does it give you a clean reading after 3k rpm?

Is it possible to easily and temporarily disable the multispark function?

DonTZ125 wrote:Does it give you a clean reading after 3k rpm?

That is a good plan! 'Cause it should!

DonTZ125 wrote:Is it possible to easily and temporarily disable the multispark function?

I doubt it very much. There are no controls on the box to be able to do so.