Cannot control timing with MSII
Posted: Mon Oct 21, 2013 6:51 am
We have the MSII working great with everything except controlling the coil directly. We have gone over the wiring, regrounded everything properly but it simply will not control the timing. We have tested the voltage on pin#36 and we are getting ~4-5 volts but it is constant, no grounding to trigger the coil.
One thing that bothers us is that we cannot find IGBTOUT or IGN to verify that jumpers are set correctly according to http://www.megamanual.com/ms2/vb921.htm , we just assumed everything was jumpered properly since we did not build the board ourselves.
One thing that bothers us is that we cannot find IGBTOUT or IGN to verify that jumpers are set correctly according to http://www.megamanual.com/ms2/vb921.htm , we just assumed everything was jumpered properly since we did not build the board ourselves.