I purchased a diy autotune unit but im having trouble making it run off mstunerstudio or megatune...
I have gone through the manual but must be missing something
I have tested my serial x usb cable using hyper terminal and it loops back
I hooked my ecu to the computer and have the stimulator plugged in and a brand new 9v battery installed on the stim.ted
I have my cable set to COM1
Started megatune 2.25
communications/setup and made sure my settings were for com1 timer interval 50 data rate 9600
went to configuator new project and thats where I get stuck..
Any help would be appreciated.
First time ecu run (built by DIYAutoTune)
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: First time ecu run (built by DIYAutoTune)
Any reason you're using MegaTune? I'd recommend TunerStudio; it automatically detects what firmware you're using, and does a lot of the configuring automatically.
