After finding conflicting info and plug wiring colors I would to know if anyone can verify if I have the wiring from the EDIS module to the Chrysler coil pack connector correct. I'd rather only do this once unlike everything else.
I'm connecting as follows:
#10 EDIS pin (yell/blk) to coil pin #2 (gray/red)
#11 EDIS pin (yell/wht) to coil pin #4 (blue/gray)
#12 EDIS pin (yell/red) to coil pin #1(red/yell)
Green/orange from coil plug to 12+, coil pin #3
I have attached a photo of both plugs as well as the project car, a 75 280Z that I'm adding MS and turbo.
Thanks in advance.
EDIS Module to Chrysler coil wiring
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
straightpipez
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue May 13, 2014 9:50 am
EDIS Module to Chrysler coil wiring
You do not have the required permissions to view the files attached to this post.