Page 1 of 1
I see this board complete
Posted: Thu May 15, 2014 10:36 am
by gath
I want to buy this board from a seller who says that it is a Megasquirt v 3.0, but it looks like it has a lot components lacking. Like a number of resistors and some transistors. What do you think? Thnx.
Re: I see this board complete
Posted: Thu May 15, 2014 2:19 pm
by kjones6039
Looks like MS1 v. 3.0 alright......
But, based on that picture, I would hesitate to guess what it was set up for (based on the uninstalled components)........
Ken
Re: I see this board complete
Posted: Thu May 15, 2014 2:57 pm
by trakkies
It appears to have the VR input missing. What's strange is Q12 missing for Inj 2, and some signs of bodging to Q9, its counterpart on Inj 1.
It might be worth a punt if it's cheap - all the parts can be bought easily. If the PCB itself is undamaged. Which may be a big if.
In the UK, a fully populated and working MS1 V3 would make about £150 used. I'd not be inclined to pay much more than £50 for that one unseen.
Re: I see this board complete
Posted: Thu May 15, 2014 3:06 pm
by kjones6039
I'd not be inclined to pay much more than £50 for that one unseen.
Amen.........
Re: I see this board complete
Posted: Thu May 15, 2014 5:05 pm
by gath
Input was very helpful, I will just opt out on it coz 'am new to this.. besides, I don't even know how to test it. I would rather pay more and get a known function assembly, Thnx.
Re: I see this board complete
Posted: Sat May 17, 2014 4:30 pm
by gath
K, I now have a megasquirt 2 V3.0 and wanted to know if there are pre-made adapters for a BMW M50 ECUs. Thnx.
Re: I see this board complete
Posted: Sat May 17, 2014 4:58 pm
by kjones6039
gath wrote:K, I now have a megasquirt 2 V3.0 and wanted to know if there are pre-made adapters for a BMW M50 ECUs. Thnx.
To adapt what to what?
Ken
Re: I see this board complete
Posted: Sat May 17, 2014 8:15 pm
by gath
To adapt the BMW m50 55 pin Bosch ecu harness to the megasquirt.
Re: I see this board complete
Posted: Sat May 17, 2014 8:40 pm
by kjones6039
gath wrote:To adapt the BMW m50 55 pin Bosch ecu harness to the megasquirt.
Got it!
Have you checked with DIYAutoTune? They have a lot of stuff over there.
Can I safely assume that you did not buy the board that you originally posted about?
Ken
Re: I see this board complete
Posted: Sun May 18, 2014 10:59 am
by gath
Definitely not the one I had posted about. And I have found the adapter I was looking for @ DIYAutoTune.
http://www.DIYAutoTune.com/catalog/diyb ... p-415.html
Re: I see this board complete
Posted: Sun May 18, 2014 12:36 pm
by kjones6039
That otta work! Glad you found it!
Good luck!
Ken
Re: I see this board complete
Posted: Mon May 19, 2014 12:12 am
by gath
Thanks, I'll post updates.