i done it on MS1Extra with no problem, but this one is confusing me, i just want to control a solenoid or relay (just on-off)
under "Idle Control" i selected Solenoids at 140* i can change my temp on the simulator and my LED on the megasquirt goes on and off as i go higher or lower on temp, but have no responce on the led in the simulator, , dont know what to select on the "Output Port Settings: menu and where does the signal comes out. thanks,
MS2 V3 Idle solenoid setup
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MS2 V3 Idle solenoid setup
Please post your complete MSQ. I'd like tosee all the settings.
Re: MS2 V3 Idle solenoid setup
it is a megasquirt 2 , daughterboard. or what do you by MSQ,
Re: MS2 V3 Idle solenoid setup
An MSQ file is the settings file for your tune. See http://www.megamanual.com/MSFAQ.htm for how to save yours then post as an attachment.
Forum Admin Team
Be sure to read Forum Rules here
Be sure to read Forum Rules here