If I physically move the sensor 20 Deg back on an engine, I can do the manual calculations for BTDC offset to plugin. Even wire up my PC and get some idea of the timing.
Last time I checked the software only goes down to TDC eg 0.
We are talking naturally aspirated! so there is no boost pressure to derate the spark.
Has this changed?
I do not wish to hack the code.
Can I fire the spark ADTC @WOT
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
smokingwheels
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Feb 02, 2010 3:45 am
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Can I fire the spark ADTC @WOT
Which firmware are you on?
It's pretty rare to need a spark ATDC even in very high boost builds, but some firmware variants allow this for things like antilag or rev limiting.
It's pretty rare to need a spark ATDC even in very high boost builds, but some firmware variants allow this for things like antilag or rev limiting.
