MSefi.com read only forum (Jan.15,2018)

Just booked a room for Fri. and Sat. If I were to bring along a spare ECU would there be some one to show me how to modify it for MS2extra with COP?

Could I trigger VW coil on plug with EDIS. The cop's would be from a 2001 1.8t

Where can I purchase bare thermistors that work like the ones in the stock GM sensors.

What board,MS I or MS II,code version are you using. People need to know these things to help.

I'm sure that if your VR sensor is from a 94 it is not a hall effect type.

You might say what your combo is and a few more might be able to help. The MSQ I posted is for a stock 94 Golf with a dizzy so some of this may not help you. The tooth count delay teeth etc may help you. I built a adapter out of an old ecu so that I can go back to the stock ecu if needed.

You could maybe get something from this MSQ. I'm running 2.886 code.

Are you using stock coil if you are I used logiclevel see this http://www.microsquirt.info/us_logic_level_spark.htm [url]
I'm running my factory tach from this signal also.

Are you worried about keeping it stock looking? if not use a 3.2 carrera manifold they are not to hard to source and often come with injectors,rails and regulator.

I would like to run lpg on a six cylinder turbo with a little over 500 HP. I'm thinking it could be done with 2 sets of injectors staged. Anybody using lpg injectors or have ny idea where to locate these? along with a regulator.