MSefi.com read only forum (Jan.15,2018)

Picked up another adapter the other day, same chipset, different brand. Works fine.

Go figure haha.

I'm the only one in the area that builds/tunes Megasquirt systems as far as I know. I know one other guy that had one and sold it.

Yeah, they were both plugged into the same outlet. To test, I even hooked it up in the car and ran the laptop off of the battery. Still nothing. But it works perfectly ...

It's a standard stim, not a jimstim. Powered with a 12VDC, 500mA wall wart.
I've tried 3 PC's - two Dell latitude D830 laptops running XP Pro SP3, and a Fujitsu tablet PC running win2k SP4 (this is the machine I'm using in the car). The MS is MSII, PCB v3.0, ms2extra 2.1.0p codebase.

This behavior ...

That's strange. At this point, I've tried about 8 different drivers, I've dropped the FIFO buffers to 1, even disabled them entirely at one point. I've found that sometimes if I turn the stim RPM all the way to 0, the gauges will work, but as soon as it starts sending a tach signal, they stop ...

In that case, I'd rather a mod move it - I deplore cross-posting.

I've got a Prolific adapter, chipset PL-2303. It'll connect without any issues, and I can eventually burn data across it (takes 10+ minutes), but nothing in the dashboard shows any data. I can open a terminal and see some data transferring, but nothing operates. Seems like I read somewhere in the ...

Actually I think that's what I'm looking for haha. I was just exhausted and looked over it. I'll test it out tomorrow to see if it functions like it needs to.

Thanks!

I may be an confused person and have overlooked it, but is there an option to change the state of one of the spare outputs (Fidle, for example) on power-up? Basically, here's what I'm dealing with:

Using a 1G DSM as the example.
The ECU has two different power inputs. Backup power comes in on pin ...