MSefi.com read only forum (Jan.15,2018)

A serial to bluetooth adaptor for your MS.

OK thanks Phil guess I better get one ordered up

Awsome thanks, is this one going to be blue tooth or usb to the phone?

Awsome this makes me happy since I already tomahawked one laptop off of my fourwheeler, it's pretty hard to log and tune hanginging onto a laptop or strappimg it down. I get some weird looks from my neighbors Is the betta going to be offered to eveyone?

thanks Matt

How do you get the VE/AFR tables to show load percentage instead of map/kPa? I'm at a loss I have looked everywhere, this is on 2.890 and 2.891.

Thanks
Robert

well I got it figured out my TPS is toast kinda weird it was off a low mileage unit only a couple of years old. Thanks for everyones replies

Everything works great on the simulator no unstable readings everythings perfect. My tps readings wander all over the place on the vehicle even with all accesories and engine off. Kinda weird

This is the best tach signal I can get r56 full counterclockwise, r52 full clockwise. I dont think the dip in the signal is going away must be how the reluctor is setup on the machine

Well it's a single cylinder 4 stroke with a turbo, I am just getting started with it and I am currently running alphaN and speed density. I blend from alpha N to speed density around 3500 rpm, map sensor is on a 3/32" hose that is about 3' long I dont have any filters or restrictions yet but will ...

Well I got some time tonight, took some logs they don't look very good :? Looks like things are all over the place, look at the rpm spikes in the log and tps instability. Something weird is goin on, I have R52 the hysteresis pot turned fully clock wise to get a somewhat useable rpm trigger guess I ...

All sensor grounds are on the megasquirt, no mechanical interference it's a cable and there is plenty of slack. I will check tonight some of the other things didn't get time last night. Thanks for all replies.

Anywhere from -14 to +12, haven't had time to check the stuff I wanted to yet. I just noticed your in Eureka, I'm in Spring Creek

It seamed fine on the simulator, but I don't remeber calibrating it to the sim, it's been a couple of months. I was thinking about it last night, maybe the connection is dirty on the tps it's used one off of a raptor fourwheeler if thats good I will through the simulator on it. What else could be ...

I have a problem with my tps reading differently. I will calibrate it then it slowly starts reading off either negative or positive. Recalibrate again same problem it just keeps changing, I notice it the most after restarting. MS2 with 2.890