MSefi.com read only forum (Jan.15,2018)

It is semi-unclear to me what happened but essentially I screwed up the firmware on the ms2 when I opened the updated version of TS by attempting to communicate with the extender board before loading my tune. Now I have updated Tuner Studio and as well updated my Firmware version loaded in my MS2. I ...

Phil! Thanks for responding!

TS 2.2.30 is the version I installed 2 days ago. Seemed like it was the most recent.

All 3 LED lights simply flash for a second when I turn the ignition on and then off. There are a few LED lights lit up on my EEC-IV board.
I lost contact with TS when I installed the ...

Hi all,

I added a tinylOx to my system and I was informed that I should upgrade to the latest beta version of TS to make the setup easier. I installed 2.2.3 and now I have 0 communication with the ecu through TS and Megasquirt. "Test Port" fails on all settings. And the other symptom that I found ...

ouch! that's embarrassing! so just to double check if my car is firing no problem cold at 2ms then i should start the hot at somewhere around .5 or so and see how that does? thanks for catching that matt. funny how one can stare at the screen and not notice the obvious.

any adjustments to the prime puslewidth?

I with the help of my room temperature IQ realized that I didn't have a mica insulator between the rail and Q16. Installed the mica insulator and everything is good to go now. on to tuning

It cranks, I smell fuel (maybe too much), my timing light flashes when cranking, it cold starts better faster and harder than any of my other cars. It dumps right into a perfect idle as well. I don't necessarily know if the pwm valve is working but the way it is running it's not a main concern. Any ...

Matt,

A quick thought and correct me if I'm wrong. If I set the timing to 10 degrees with the spout out then that would mean that my initial timing is set and should fire with the spout in right???? Would this be the sign that the timing is set to stock and should fire??? I tried 10 through 18 ...

Matt,

I toned the fuel down a bit and had it in the 13.5 range. I enabled the autotune feature under tuning/vetable1/tools and a lot of the fuel came back. I'm going to knock the fuel down again tomorrow but even with the fuel down and the spout in i'm not getting any spark ...

Okay I've been nonstop reading on the forums. I've fixed the situation with the O2 sensor and it seems as though the car is running a bit better but it's still way too rich. It might just be placebo making me think that it's running better due to fixing one of the problems... The rest of the ...

Help before I throw this and myself off of a cliff!!!

Application:
Ford 347, TFI, MS2, Adapter Board, LC-1 Wideband

Problems:
Car won't start with spout in
Car starts with spout out but very rough and rich
No Spark with spout in
Wideband won't read in Megatune (brown wire from LC-1 connected to ...