Some sites for finding fuel injector specifications

MegaScott · Post by **MegaScott** » Sat Jul 24, 2004 8:45 am

The link that was here originally turned dead, so I replaced it with this Catalog of Accel injectors
ACCEL fuel injectors

S.

FridgeFreezer · Post by **FridgeFreezer** » Wed Nov 10, 2004 3:14 pm

Some more Rover V8 injectors, more info as I find it...

BOSCH:
0 280 150 105 (grey) - 3.5 - 18.1lb/hr @ 43psi
0 280 150 227 (black) - 3.9 - ? Looks like they were in 3.5's too
0 280 155 787 (green) - 4.6

Presumably specs are similar to the Lucas ones - Low-Z.

Also some more pictures and things to help injector identification:
http://www.sdsefi.com/injectors.htm
http://www.gomog.com/allmorgan/ljet/FIarts.pdf

Strog · Post by **Strog** » Thu Nov 11, 2004 2:18 am

Bosch 0280 150 953 used in VW's VR6 engine (VAGÃ‚Â part number 021 903 061A)
resistance 14 ohm
flow: 205cc/min@bar

Strog

blownharley · Post by **blownharley** » Wed Mar 30, 2005 7:22 am

Bosch 0 280 156 023 used in Saab 4-2.0l, 4-2.3l Turbo flows
261g/min = approx. 373cc at 3bar pressure. (1bar ~14.7 PSI).
Sorry about the units, but this was the answer Bosch gave me

darkstarmedia · Post by **darkstarmedia** » Sun May 15, 2005 9:52 pm

Found a good site for specs on Jeep/mopar stuff

http://www.jeep4.0performance.4mg.com/tech_specs.html

Big Creek · Post by **Big Creek** » Sat Nov 05, 2005 7:23 pm

Lance, here is another pretty good site with some pretty accurate looking flow ratings. They actually flow test and post there findings.

http://www.witchhunter.com/injectordata1.htm

Todd

deviousKA · Post by **deviousKA** » Fri Feb 10, 2006 12:12 am

I have had the pleasure of dealing with Witchhunter performance for all of my injector cleaning and flow testing. It is a very nice shop to deal with, high quality work yet affordable.

They are the only shop I have ever found that has all of the proprietary adapters for japanese TBI (like nissan truck, mitsu tbi etc..)

Here is a pdf chart with various japanese top feed injectors.
http://hybridka.com/misc/TopFeedInjectors.pdf

stv firestarter · Post by **stv firestarter** » Mon May 01, 2006 12:32 pm

heres flow chart for bosch and weber hope it helps http://66.249.93.104/search?q=cache:K4V ... clnk&cd=23

jharvey · Post by **jharvey** » Fri Jun 09, 2006 5:34 am

Two small injectors with spray pattern pics are here.

viewtopic.php?t=19550

BigBlue · Post by **BigBlue** » Sun Oct 29, 2006 3:03 pm

Here's a sit that lists injector tables for various brands.
http://users.erols.com/srweiss/tableifc.htm

Chris

fscott · Post by **fscott** » Tue Apr 10, 2007 3:29 pm

Here's another site with an excellent list of Bosch part numbers with flow in CC and injector resistance.

http://www.injectorcleaning.co.uk/flow.htm

em_knaps · Post by **em_knaps** » Thu Jun 14, 2007 1:35 am

A very usefull site with visual identification as well...

http://injectorservices.com/injectflow.htm

Daniel.

arnold · Post by **arnold** » Sat Nov 10, 2007 3:19 am

http://www.allmotorhonda.com/techpages/injector.htm

enyawix · Post by **enyawix** » Tue Jan 22, 2008 11:58 am

Ford fuel injector table

part of Mass air documentation project

DieselSJ · Post by **DieselSJ** » Tue Jan 22, 2008 3:44 pm

enyawix wrote:Ford fuel injector table

part of Mass air documentation project

Careful with that - not all of those injectors are rated at the same fuel pressure. Most of the earlier ones are rated at 39psi, while the later small body are rated at about 45 psi (3 bar). Also, the small black body Cobra are 25lb according to my sources.

Have you been able to find the open time specification for any of those (specifically the small body Cobra injectors)?

enyawix · Post by **enyawix** » Tue Jan 22, 2008 4:50 pm

the 93 Cobra are 24 @ 45 I have used them. so far I have used 19, 24, 30, 36, and just went 42.

Never tried the 17 or white 24 I did not just start racing fords, I am currently making over 400hp at the wheels.

DieselSJ · Post by **DieselSJ** » Tue Jan 22, 2008 7:15 pm

enyawix wrote:the 93 Cobra are 24 @ 45 I have used them. so far I have used 19, 24, 30, 36, and just went 42.

Never tried the 17 or white 24 I did not just start racing fords, I am currently making over 400hp at the wheels.

The '93 Cobra are the large body with the EV1 connector and they are 24lb at 39psi and IIRC they were blue tops (we did the development on the Cobra R - I'm not new to Fords either). All the 5.0/5.8 stuff was rated at 39psi. The one pictured is the 0280155865 with the EV6 connector which is the '99 Cobra injector, which I have seen rated at 24 and 25 lbs @ 43.5.

enyawix · Post by **enyawix** » Sun Jan 27, 2008 11:14 am

I did not realize my fuel pressure is set high. I bought an adjustable fuel regulator, with my first injector upgrade. I will fix the table. I have the green 42lbs injectors now. What will they put out at 45psi

krazykannuck · Post by **krazykannuck** » Tue May 27, 2008 8:11 pm

I thought this might be helpful for the holley tbi 85#/h injectors

http://go.delphi.com/CS/DPSS/CATALOG/Pr ... er=FJ10043

93 gmc sonoma 2.5L

cricha5 · Post by **cricha5** » Wed Apr 01, 2009 7:00 am

If you look at the thread linked bellow, there are two spreadsheets. One with a ton of bosch specs, even new ones, and one that does unit conversion. The bosch spreadsheet sent by Mk1rocco has info I was unable to find anywhere else.

viewtopic.php?f=29&t=34875

MSefi.com read only forum (Jan.15,2018)

Some sites for finding fuel injector specifications

Some sites and othe for finding fuel injector specifications

Some sites and othe for finding fuel injector specifications

Some sites and othe for finding fuel injector specifications

Bosch 0 280 156 023

Injector tables

some Honda injectors

part of Mass air documentation project

Re: part of Mass air documentation project

Re: Some sites for finding fuel injector specifications

Re: Some sites for finding fuel injector specifications