So I have some Buick 19lb injectors (Bosch actually, but out of some kind of Buick V6 engine that was MPFI). According to my reference book that came with my fuel pressure gauge, GM MPFI vehicles run 36-42psi. Well it's going into a Dodge which runs 55psi of fuel pressure, how big are they now? My math says 26lb, is that correct?
The part number on the injectors is 0280150235 for anyone that wants to just look them up directly somewhere.
Thanks!
Injector Size at higher fuel pressure?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
UnaClocker
Found the answer here: http://www.rceng.com/technical.htm
Seems they will flow about 23lbs now. Glad I checked into the original fuel pressure for these things.
Seems they will flow about 23lbs now. Glad I checked into the original fuel pressure for these things.