Tuning VE Table

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
renaldo
MegaSquirt Newbie
Posts: 2
Joined: Thu Mar 30, 2006 9:13 pm

Tuning VE Table

Post by renaldo »

Hey guys i'm trying to get my VE table tuned so that my car would drive smooth..but i can....seem to get it driving smooth enough so that I can let someone else drive while i tune...can anyone tell me how I can tune the VE table at 3-7000rpms do i need to hold the rpm steady and adjust the mixture or what...and is the ve table to only thing that i need to tune to get the car driving smooth?
Top
Sultzi
MegaSquirt Newbie
Posts: 1
Joined: Sat Mar 11, 2006 10:09 am

Post by Sultzi »

You can tune your ve table with megalogviewer. I did, and ve table is pretty good after couple of runs. More info and download from: http://www.ideasandsolutions.biz/MegaLogViewer/ :)
Top
renaldo
MegaSquirt Newbie
Posts: 2
Joined: Thu Mar 30, 2006 9:13 pm

Post by renaldo »

Thanks...i'll try it today and let you kno if it works for me.
Top
Post Reply

Return to “Tuning Fuel and Air”