Propane injectors

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Turbo nut
MegaSquirt Newbie
Posts: 10
Joined: Tue Mar 28, 2006 11:00 pm
Location: Yamhill Oregon

Propane injectors

Post by Turbo nut »

I would like to run lpg on a six cylinder turbo with a little over 500 HP. I'm thinking it could be done with 2 sets of injectors staged. Anybody using lpg injectors or have ny idea where to locate these? along with a regulator.
1982 porsche 930
1994 VW Golf 2.0 MS II V3.0
Top
the bubbler
MegaSquirt Newbie
Posts: 7
Joined: Wed Oct 19, 2005 8:43 am

Post by the bubbler »

Prins seem to be the main players in the LPG injection market-

http://www.prins-lpg.com/en/products/yps/index.html

Be warned, the prices of injectors aren't cheap!

Andy
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”