i checked my wiring and found that both sides of the wire has 12v power on it. i was under the assumption that MS would ground the injectors in order to fire them, so right now the injectors are just being held open. i don't really know what i have done wrong so any help would be appreciatedInjector flood
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Ruff Ryder 6
- MegaSquirt Newbie
- Posts: 2
- Joined: Thu Sep 07, 2006 6:17 pm
Injector flood
I really hope someone can help me here. what i have is a V3.0 board with the MS-I daughterboard and plan to use MSnSE. it is a nissan 240sx with the KA24DE engine. my problem is that when i wired my injectors, for some reason there is 12v power going to all the injectors. i have a common power wire which goes to my fuse block and the each bank has 2 injectors on it (1,4 and 2,3). when i turned the key on my car the injectors filled my intake manifold with gas and there was well over a gallon of gas in the cylinders, plenum, and intake piping almost all the way back to my turbo. i checked my wiring and found that both sides of the wire has 12v power on it. i was under the assumption that MS would ground the injectors in order to fire them, so right now the injectors are just being held open. i don't really know what i have done wrong so any help would be appreciated
i checked my wiring and found that both sides of the wire has 12v power on it. i was under the assumption that MS would ground the injectors in order to fire them, so right now the injectors are just being held open. i don't really know what i have done wrong so any help would be appreciated-
Ruff Ryder 6
- MegaSquirt Newbie
- Posts: 2
- Joined: Thu Sep 07, 2006 6:17 pm