Just wanted to check something before I wire it in -
Will be running MSII (V3.57) on a 4 cyl engine using motorbike TB's (GSXR600) - The injectors are wired together, so will be using batch firing....Can you confirm, it's cyl 1 and 4, and 2 and 3 to be connected together for the batch firing (i.e, not 1 and 2, 3 and 4).
Thanks.
Paul.
Injector connections...
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
FridgeFreezer
- MegaSquirt Newbie
- Posts: 19
- Joined: Thu May 13, 2004 12:52 am
- Location: Gosport, UK
- Contact:
Re: Injector connections...
As Fridge says - that's generally correct with a standard firing order and cylinder placement. You would normally pair the cylinders that fire 360° apart on a 4-cyl. That being said, some users have reported certain engines preferring 180°, especially boxer engines. If possible leave some room in your loom to swap injectors for testing. It would be helpful to others if you report your results.Jenko wrote:...Can you confirm, it's cyl 1 and 4, and 2 and 3 to be connected together for the batch firing (i.e, not 1 and 2, 3 and 4).
David