Warm up question

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Juliemac
MegaSquirt Newbie
Posts: 16
Joined: Fri Jan 13, 2006 4:29 pm
Location: Up State NY

Warm up question

Post by Juliemac »

I am running an MSII on .29 on a VW 2L 16v.
In the warm up wizard, should the car be running stoich or lean to rush the warm up?
1981 VW Scirocco w Turbo 2L 16v
devastator
Experienced Squirter
Posts: 333
Joined: Mon Feb 11, 2008 10:19 am
Location: Kinda near Tucson Arizona

Re: Warm up question

Post by devastator »

Lean should warm up faster, but none of my engines like running lean when they are cold.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished. :twisted:
Post Reply