I buy a four injector 195500-2020 from Mazda Rx-7 12-13.7 Ohm
i can use this injectors without Resistor pack only connected to the ms
and set the:
PWM % = at 100
PWM MS = at 25
and the ms can run this type of injector without problems ?
it does not burn the MegaSquirt
Injector 12-13.7 Ohm how to MS 3.0?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
trdae86gts
- MegaSquirt Newbie
- Posts: 3
- Joined: Mon Aug 11, 2008 9:43 am
-
elturbonitroso
- MegaSquirt Newbie
- Posts: 15
- Joined: Thu Jan 05, 2006 7:26 pm
- Location: CONNECTICUT
Re: Injector 12-13.7 Ohm how to MS 3.0?
yes you dont need the resistor ms will run the inj with no problem.